If you like to stand-up paddleboard, this pack is perfect for a group summer experience. Ideal for holidays and calm waters!
How can I repair my stand-up paddleboard?
We have a repair kit for paddleboards with reference 8512384 for repairing small, easily visible leaks. For all other repairs, we recommend contacting your local in-shore workshop. We can repair fin bases, handles, valves and significant leaks.
What kind of construction?
Single-layer dropstitch with no stringer. Two-layer side strips with double assembly technology: 1st strip glued, 2nd strip glued.
How do you inflate and deflate a SUP?
INFLATION: Check that the valve's orange button is up (closed), by pressing on it. Connect the pump. Inflate to 15 PSI. The more inflated the SUP, the more stable it is and the better it glides. Disconnect the pump and close the outer plug. DEFLATION:
DEFLATION: Firmly press the orange button on the valve to let the air out. Do not put your face near and stand back. Roll it up, starting from the opposite side to the valve to remove all the air.
How should I store my board and where should I leave it to dry?
Never leave your board out of the water in direct sunlight. If you must leave the board in the sun, we recommend keeping it away from any source of heat (walls, floor, car roofs, etc.) and lowering the pressure to 10 psi to prevent overpressure and irreversible damage (bursting, delamination, leaks, etc.).
Technical dimensions
Inflated board: Length: 9’6 (290 cm)
Width: 33" (84 cm)
Thickness: 4.75" (12 cm)
Volume: 245 litres
Board weight only: 6.7 kg (+/- 10%)
Weight of board, leash, fins and backpack: 8.9 kg (+/- 10%)
Weight of paddle included: 1100 g (+/- 10%)
Weight of pump included: 1200 g (+/- 10%)
BAG CONTAINING FOLDED SUP:
Height: 94 cm
Width: 42 cm Thickness: 24 cm
These dimensions leave room for the pump and paddle
FIN AND FIN BASE
Available through customer service and online in the event of breakage or loss. SUP fin reference: 8363793
Remember to remove the fin once you are out of the water. If possible, rinse the fin base before and after use. Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Recommendations for use
We recommend:
Always wear a buoyancy aid or a PFD leash. Do not go further than 300 metres from shelter. Do not use the leash in rivers. Notify someone of your trip and your location. Do some research to find out if there are any local navigation rules that apply to your trip location.
What is the recommended user weight and maximum board load?
Designed for riders up to 80 kg without compromising on glide quality. Recommended user weight:
Under 60 kg: very stable board
Under 80 kg: ideal board for an easy introduction to stand-up paddleboarding
Over 80 kg: relatively unstable board for beginners
Maximum load for buoyancy: 245 kg
WHAT IS INCLUDED IN THE PACK?
9’6 SUP
Adjustable split paddle
High pressure manual pump
Standard fin
Backpack
Leash
User guide
Repair patches (glue not included)
Valve tightening tool
What should I do with the tightening tool in the SUP bag?
NEVER UNDO THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY. If the valve leaks, once the SUP has deflated, close it a quarter turn using the tool provided. If necessary, it is possible to change the valve, please consult your Decathlon store workshop.
The perfect SUP for riders under 80 kg. Accessible and complete pack (board, paddle, pump). Get out there and enjoy the pleasures of boating on calm waters.
Stability
Designed for a maximum weight of 80 kg. Maximum load for buoyancy: 245 kg
Glide performance
This 9'6 SUP glides better than 8' or 9' boards, but not as well as 10'6 ones.
Easy transport
Light and compact, it can be easily folded and stored in its bag.
If you like to stand-up paddleboard, this pack is perfect for a group summer experience. Ideal for holidays and calm waters!
Reviews