Designed to protect your lower back, torso and face from mud while riding.
COMPATIBLE ACCESSORIES
In dry weather, when there is no rain and mud around, you can detach the blade from the rear bracket and place a sports camera in its place. 'GoPro' clip system. For your safety on early morning or late night rides. A rail has been placed at the end of the rear mud blade to accommodate a red taillight of type CL 100, CL 500, CL 900, ST 500 or RL 510.
PROTECTION LEVEL
This wide and durable kit prevents mud from splashing on your lower back, chest and face. To do this, position the rear mudguard as close as possible (2 to 3 cm) to the wheel.
You can't completely avoid mud splashes when it's wet...
For travel from point A to B, we recommend a mudguard kit for hybrid bikes, with longer blades near the wheels, if it is compatible with the frame and tire width.
Bike compatibility
This kit is suitable for 26"–29" mountain bikes, with tires up to 2.8" (27.5") and 2.6" (29"), with telescopic fork. To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm. For fork steerers with a diameter of 23–24 mm, use the smaller mounting parts and tighten them firmly. To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm.
A MODERN AND EFFICIENT DESIGN
With dimensions suitable for all new wheel and tire sizes, and a bold design, this kit gives the bike a modern and sporty look. Everything is designed to give you the best experience:
- A reliable screw-on support that keeps the mudguards in the same position every time
- An easy system to attach the blades to your bike and remove them from it depending on the weather
- Compatibility with accessories (camera, lights)
Dimensions and weight
Front: Blade length: 553 mm
Blade width: 73 to 97 mm
Total weight: 120 g
Rear:
Blade length: 497 mm
Blade width: 73 to 95 mm
Total weight: 230 g
BOX CONTENTS
The front mudguard comes with 2 expanders that allow it to be mounted on steerer tubes with a diameter between 19.2 and 24.2 mm, and 29 and 35 mm. The rear mudguard comes fully assembled and ready to be mounted, regardless of the diameter of your seat post.
This set of front and rear mudguards, from 26"–29", is easy to mount and remove. Fixed with screws, it ensures a perfect fit for mountain biking.
Non-messy
This kit protects your lower back, chest and face from mud well.
Compatibility
This kit fits 26" to 29" mountain bikes with a telescopic fork
Weight
Front weight: 120 g
Rear weight: 230 g
TOTAL: 350g
Easy assembly / dismantling
Fits into the screwed brackets with one click and maintains the set position.
Robustness
The rear part has a "safety" arm (which unclips) in case of strong impacts.
Designed to protect your lower back, torso and face from mud while riding.
Reviews