This inner tube is suitable for 16" diameter tires with a section from 1.50 to 1.90 with a 33 mm Schrader valve.
Tire fitting:
For a safe installation, start from the valve and continue to the opposite end. Never use metal tools that could pinch the inner tube.
How to choose an inner tube:
To maintain a bicycle, it is essential to know the exact tire dimensions. This information is found on the side of the tire (diameter and width). For example, 16 x 1.60 corresponds to a tire that is 16 inches in diameter and 1.60 inches wide. The ETRTO marking (e.g. 40-305) indicates a width of 40 mm and an inner diameter of 305 mm, which is equivalent to 16 x 1.60.
Inflating a tire:
Observe the pressure indicated on the side of the tire. Make sure the tire remains properly seated during inflation.
Find more information available with this link:
https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air
To remove the inner tube, you will need the following tools:
Remove the worn inner tube using B'TWIN tire levers.
Checks to perform before installing an inner tube:
Remove any dirt, glass, or debris stuck in the tire. A foreign object left behind can cause a puncture very quickly, so check the tire carefully. Check that there are no objects stuck in the tire after a ride. Even a small stone can puncture your inner tube over time. Clean the tire surface before putting it back. Gently run your finger over the tire to feel for any anomalies.
Weight:
100 g
Professional advice:
Before you set off, check your tire pressure: Properly inflated tires prevent punctures and improve performance.
How to change an inner tube
Watch our tutorial to get started. Inflate the inner tube a little beforehand, insert the valve using the correct type, place the inner tube in the tire, and make sure it is not pinched when closing.
This inner tube is suitable for 16" diameter tires with a section from 1.50 to 1.90 with a 33 mm Schrader valve.
Compatibility
16" x 1.50 to 1.90 tires
ETRTO 38/47 - 305
Watertight
Optimized composition for good inner tube sealing.
This inner tube is suitable for 16" diameter tires with a section from 1.50 to 1.90 with a 33 mm Schrader valve.
Reviews