This self-adhesive patch kit allows you to easily and quickly repair punctures so you can continue to enjoy your bike rides.
Sanding:
Good sanding of the relevant area will give you a better result. The aim is to achieve a flat and clean surface so that the patch adheres as well as possible. If the puncture is close to excess material, sand until the excess is removed. Sanding will create micro-scratches that will allow the adhesive on your patch to harden more easily. This stage is very important for a durable repair.
Cleaning:
Clean any dirt to ensure a clean, flat and dry surface for applying the patch. Remember: Do not use water or any other product to clean the inner tube after sanding. It is essential to have a clean and dry surface to ensure your patch lasts.
Did you know?
To ensure that the patch stays in place for as long as possible on the repaired tire, we strongly recommend that you reinflate the tire within 24 hours of applying the patch and inflate it to the recommended pressure.
Storage:
Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light, in the original packaging. Minimum temperature for repairs: +10°C
Operating temperature: -40°C to +65°C
Applying the patch:
Be careful not to touch the adhesive part when applying the patch, so as not to reduce its adhesive power. Remove any air bubbles from the center of the patch towards the edges. Rub the patch with your fingernail to warm it up and help it stick better. Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean and flat surface for greater effectiveness).
User tip:
1. Remove the inner tube and find the puncture site
2. Roughen the area around the puncture using sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press firmly over the entire area for about 45 seconds.
5. Run your fingernail over the adhesive patch to increase its adhesive power
6. Place the tire back on the rim and the wheel on the bike.
7. Inflate your tire to the recommended pressure.
8 self-adhesive patches for puncture repair without vulcanizing solution.
Compatibility
100% effective on all types of butyl inner tubes.
Ease of use
Less restrictive and just as effective as a classic patch.
Easy assembly / dismantling
Easy to stick and quick to use.
This self-adhesive patch kit allows you to easily and quickly repair punctures so you can continue to enjoy your bike rides.
Reviews