Inner tube repair kit.
How to use a repair patch on an inner tube
1. Preparation: Find the hole, sand the area using the sandpaper provided. Then clean with a degreaser and thoroughly dry the surface.2. Adhesion: Spread the adhesive evenly around the puncture point. Wait about two minutes until it becomes matte, meaning it no longer shines.3. Application: Place the patch over the hole in the center (without touching the adhesive with your fingers) and press firmly for one minute. Leave the transparent film on.
Tips from the pros
Check that no objects are stuck in the tire before putting the tire back in place.
Product details:
4 round patches (19 cm diameter)
2 rectangular patches (18 mm x 28 mm)
1 piece of sandpaper
1 tube of rubber cement (5 g)
Storage space
Patches: Optimal shelf life: 5 years at room temperature (16-22°C, 30-70% humidity), away from direct sunlight, in its original packaging. Minimum temperature for repairs: +10°C
Operating temperature: -40°C to +65°C
Tubes with liquid that dissolves:
Store sealed and away from heat sources (highly flammable)
Optimal shelf life:
- 5 years if sealed and never opened
- 6 months after opening and kept sealed
Did you know?
The transparent protective film on top of the adhesive prevents you from touching the adhesive when applying pressure. Removing the transparent film can damage your repair, so we strongly advise you to leave it on. If you still want to remove it, wait 24 hours before doing so to ensure the adhesive has had time to fully dry.
A must-have for your outings! For reliable and long-lasting puncture repairs. This patch kit is universal: compatible with 100% of inner tubes.
Compatibility
100% effective on all types of butyl inner tubes.
Compact design
Compact design fits in your pocket, so you can carry it anywhere.
Inner tube repair kit.
Reviews